Business

• vCPE Deployment Drivers and Business Benefits
• vCPE Use Cases
• Service Assured vCPE Components

View The Recording

• The Current State of vCPE
• Bridging the Gaps
• Typical Use Cases

View The Recording

• White Box CPE Advantages

• Challenges with White Box Universal CPEs

• Making Your White Box Sparkle

• RAD’s vCPE Toolbox

• Use Cases:

  • IP VPN Services with VAS

Business CPE is considered by many to be the most attractive early use case for virtualization. In this Total Telecom webinar, RAD and Amdocs present a joint end-to-end vCPE solution for business services, including the business case for virtualization of customer premises equipment.

You will:

At MEF 2017, RAD’s CTO, Dr. Yaakov Stein shared technology innovation perspectives, specifically, QoS for rich communications services.

As an early industry virtualization evangelist, RAD established and maintained a dialog with carriers and service providers on the subject of vCPE design and functionalities at the customer edge.

In this presentation, RAD’s CTO, Dr. Yaakov Stein compares and contrasts the management of physical equipment with the orchestration of virtualized entities. Architecture, implementation, and operational aspects are discussed, zooming in on recent market experience with vCPE solutions.

Cost-optimized Whitebox vCPE for business services with optional, license-based physical network functions (PNFs). Check out the presentation below to learn about the benefits that Whitebox+ provides.

At MPLS+SDN+NFV World 2016, RAD’s CTO, Dr. Yaakov Stein presented vCPE architectural options and compared implementation options based on suitability and performance for various use cases.

A review of the various vCPE implementation options available for service providers and the factors that should be considered to avoid pitfalls and ensure optimal results.

What you'll learn:

• Why vCPE is the #1 NFV use case
• Market drivers for implementing vCPE
• Best implementation scenarios for different types of services

An introduction to two way active measurement protocol (TWAMP) of performance in IP networks, including a comparison with other L3 PM methods.

This presentation provides an overview of the must have H.QoS feature set NID’s need to support multi-flow multi-priority traffic.

Table of Contents:

• Carrier Ethernet Traffic Management: Purpose and Must-Haves
• H.QoS Feature-Set
• Why Does it Matter?
• H.QoS in RAD’s Carrier Ethernet Solutions

In this white paper, RAD’s CTO. Dr. Yaakov Stein and Dr. Yuri Gittik, Head of Strategic Innovations propose an economical solution to address white box CPEs’ key challenges. Specifically, they discuss how to reconcile compelling white box principles with the required plethora of different interfaces and high data rates that were provided by yesterday’s physical CPEs.  

The European Advanced Networking Test Center and Upperside Conferences invited interested vendors to our public multi-vendor interoperability test and showcase at the MPLS + SDN + NFV World Congress 2017.

Core topics for the current edition were:

NFV and SDN transformation is driving an unprecedented level of change. As service providers start to implement these new virtual network technologies, they face a number of challenges in rolling out and operating hybrid networks. This paper reviews best practices to address these challenges via a pre-integrated, end-to-end, automated and programmable solution.

Real-world progress is being made towards the wide-scale deployment of vCPE-based services as communications service providers (CSPs) overcome some of the hurdles encountered during recent years. This report provides current market outlook for network functions virtualization (NFV) and its most prominent use case, the virtualized customer premises equipment (vCPE).