RAD is a global leader for telecom access solutions. As an industry pioneer for over 40 years, RAD reliably supplies worldwide communications service providers and critical infrastructure operators with best-of-breed Ethernet access devices, industrial IoT gateways, 5G xHaul, and Operational WAN solutions. Offering always-on connectivity from anywhere, along with data-driven, AI-powered actionable insights, RAD is distinguished for its supply-chain stability, which outsteps the market in delivery times. Founded in 1981, RAD serves as the anchor of the $1.6 billion RAD Group, an umbrella of independent companies that develop diverse networking and data communications solutions.
Contact

Contact Us

This information will be used according to our Privacy Policy

Scroll to top of page

You are here

4G/5G Mobile xHaul

Fast Rollouts of 4G/5G Deployments

Programmable cell-site gateways (CSGs) with fronthaul/midhaul/backhaul support and O-RAN 5G architecture support.

Supports CSG for multiple 5G RAN splits and colocated 4G/5G sites, as well as demarcation for wholesale mobile services over the same transport network with complete visibility and controlled hand-off.

4g-5g mobile xhaul

Your Benefits

4G/ORAN 5G Cell Site Gateway
For mobile backhaul setups using L2 or L3, RAD offers a solution for both 4G and 5G O-RAN Network (Open Radio Access Network) rollouts. The RAD ETX 2/2i, with its open RAN hardware, provides an ORAN cell site gateway for ORAN-capable network elements.
Highly Efficient

4G/5G aggregation: 10G, 25G and 100G

Fixed Mobile Covergence

Colocated mobile and fixed broadband sites.

Multi-CoS

Carrier Ethernet/ IP backhaul with service management and OAM-based diagnostics

L2, L3-based

Fronthaul/midhaul/backhaul performance monitoring for multiple network slices and for network sharing.

1588 PTP

(GM, BC, TC) with integrated GNSS receiver, SYNC-E for timing synchronization

Small Form Factor

to meet space and power supply restrictions.

Featured Products

ETX-2 Network Termination Unit Equipment & Network Interface Devices Family
ETX-2

The ETX-2 is MEF Carrier Ethernet 3.0-certified for E-Line, E-LAN, E-Tree, and E-Access services, as well as delivering TDM pseudowire over packet networks. Supporting high capacity service provisioning per EVC/EVC.CoS, flexible classification and H-QoS traffic management, ETX-2 offers accurate and scalable service testing as an RFC2544 test device as well as performance monitoring. The ETX-2 is supported by RADview management and enables a variety of protection mechanisms. It also offers NEBS-compliant and environmentally hardened enclosure options.

Carrier Ethernet Network Demarcation MEF 3.0 certified ETX-2i
ETX-2i

The ETX-2i provides MEF 3.0 demarcation and aggregation over any access, including over LTE/broadband. Its FPGA architecture flexibly adapts to future customer needs.

 

ETX-2i-10G

• 19” unit with up to four 10-GbE and up to 24 GbE ports in various combinations
• Half and full 19” unit with up to eight 10-GbE ports or four 10-GbE and up to eight GbE ports in various combinations
• Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase
synchronization in mobile networks
• ITU-T G.8032 Ethernet Ring Protection Switching
• NEBS-compliant and environment-resistant hardened enclosure option

ETX-2i-100G
ETX-2i-100G

ETX-2i-100G delivers the full suite of Carrier Ethernet demarcation and aggregation capabilities, at 100 GbE rates.

ETX-2i-100G addresses the increasing demand for high bandwidth access to data centers, while maintaining MEF 3.0 SLAs, service monitoring, flexibility and management.

 

RADview Performance Monitoring
RADview

The RADview features a network element manager, end-to-end service manager for Carrier Ethernet services, performance monitoring portal for ongoing monitoring of Ethernet and IP services, D-NFV orchestrator for virtual machines and application services at the customer edge, and a network planner for resource optimization and capacity planning.

Featuring client/server architecture with multi-user support, RADview provides intuitive graphic representation of network clouds, links, nodes, end-to-end services, and network status indication. Fully ITU-T FCAPS compliant, it offers security management supporting user access profiles and allowing network partitioning.

Everything You need to Know About 5G xHaul

Nothing can be done to stop the rush to 5G – are you up to speed?

Resources

White Papers

  • CSP Survey: L2 Business Services and 5G xHaul
  • Everything You need to Know About 5G xHaul
  • Anti-Jam Protection for LTE/LTE-A and 5G Networks
  • Time Distribution Strategies in Cellular Networks

Presentations

  • 5G xHaul in Practice

Webinars

  • Demo Webinar: Remote Asset Monitoring Solution (RAMS) Deployment Guideline
  • WATCH: RADinsight PM Demo Webinar
  • Joint IoT Evolution & RAD Webinar: IIoT with LoRaWAN Use Cases
  • xHaul 5G en la Práctica - Enfoque evolutivo para los proveedores de Transporte para el acceso
  • 5G xホールの実現 – トランスポートプロバイダーのための進化的アプローチ
  • Транспортная сеть для 5G – Эволюционный подход для операторов связи
  • 5G xHaul in der Praxis – Die Evolution der Mobilfunknetze
  • Le 5G xHaul en pratique. L’approche évolutive des fournisseurs de service wholesale mobile

LinkedIn Discussions

Contact Us

Got a specific question in mind? Need a quote? One of our experts will be happy to provide you with further information. Please fill out this short form and we'll make sure someone contacts you.

This information will be used according to our Privacy Policy

What would you like to do?