E1/T1 Fiber Optic Modem with Remote Control

• User selectable data rates from 56 kbps to 2.048 Mbps
• Large variety of data interfaces supported
• Diagnostics include V.54 loops and built-in V.52 BERT
• Three clock modes are available: internal clock, receive loopback clock and external DTE clock
• Monitoring and control from the front panel menus
• Available as a standalone unit or inserted as a module in an ASM-MN-214 chassis

• Extends the range of equipment with electrical E1 or T1 interfaces over fiber optic (up to 100 kilometers (62 miles))
• Inband management of both local and remote units saves fiber
• Laser diode option for extended range

Extends range of E1/T1 equipment

The FOMi-E1/T1 fiber optic modem with remote control extends the limited range of the electrical interface of E1 or T1 equipment over fiber optic links. Range extension is provided for the following interfaces:

• 100 ohms balanced T1 at 1.544 Mbps
• 120 ohms balanced E1 at 2.048 Mbps
• 75 ohms unbalanced E1 at 2.048 Mbps

The modem is transparent to ITU G.704 framed signals.

An inband management channel enables monitoring and control of local and remote units. The management channel is transmitted over the same fiber optic link used for data transfer, with no interference between them.

The FOMi-E1/T1 is available as a standalone unit with a front panel LCD, or with a blank panel and a portable control unit (PCU) to prevent unauthorized operation. A card version of the FOMi-E1/T1 is available for the LRS-24 19-inch rack with central SNMP management. A double modem card is also available for the LRS-24, which supports up to 24 modems in a 4U/6U-high chassis.

Two BNC coax connectors and an RJ-45 connector are used for connection to coax or twisted pair cables. An additional DB-9 connector is used for external dry contact relay activation in case of major or minor alarms.